.gif)
.gif)
Industry News
November 4, 2010
State and Local Code Officials Deliver Improvement in Building Energy Efficiency
The American Council for an Energy-Efficient Economy (ACEEE) announced that more than 500 state and local code officials voted on changes to the nation’s model energy code to achieve energy savings of 30% relative to the 2006 model code.
The new 2012 International Energy Conservation Code (IECC) meets the 30% savings goal sought by the U.S. Department of Energy, the U.S. Conference of Mayors, the National Association of State Energy Officials, governors, lawmakers, and the broad-based Energy Efficient Codes Coalition (EECC). The model energy code governs home and commercial building construction, additions, and renovations in 47 states and the District of Columbia where local building codes are based on these national model standards.
"In the last four years, the International Code Council has accomplished more in efficiency improvements than all updates combined since 1975," said Harry Misuriello, ACEEE Fellow and EECC organizer. "Local governments clearly realize that they and their citizens have an important stake in reducing building energy use, and that’s why they sent their delegates to Charlotte to vote for greater energy efficiency."
The proposals adopted into the new code address all aspects of residential and commercial building construction, laying a strong foundation for residential efficiency gains and leading commercial building efficiency improvements. In the residential sector, improvements will: ensure that new homes are better sealed to reduce heating and cooling losses; improve the efficiency of windows and skylights; increase insulation in ceilings, walls, and foundations; reduce wasted energy from leaky heating and cooling ducts; improve hot-water distribution systems to reduce wasted energy and water in piping, and boost lighting efficiency.
The package of improvements for commercial buildings should match those for homes in terms of energy savings. In addition to many of the features cited above, the commercial buildings package includes continuous air barriers, daylighting controls, use of economizers in additional climates, and a choice of three paths for designers and developers to increase efficiency: renewable energy systems, more efficient HVAC equipment, or improved lighting systems. The package also requires commissioning of new buildings to ensure that the actual energy performance of the building meets the design intent.
Opinion: Unraveling the Ultra-Low Power Design Issues
"It is notable that the votes that will have the most profound impact on national energy and environmental policy this year weren’t held in Washington or a state capital, but by governmental officials assembled by the International Code Council in Charlotte, North Carolina," said EECC Executive Director William Fay. While all Americans will share in the energy and environmental benefits of more efficient buildings, homeowners and commercial building owners and occupants top the list of beneficiaries. A study by the National Renewable Energy Laboratory found that an average home that’s 30% more energy efficient returns $511 a year in energy savings to homeowners after taking into account the small mortgage payment increase needed to pay for efficiency improvements. From the national economic perspective, efficient buildings will demonstrably reduce U.S. energy consumption, which will help stabilize energy costs to businesses and manufacturers, defer the need for new power plant construction, and, by reducing energy demand, improve national energy security.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- IR Intros Compact Low-Side Gate Drive in SOT-23-5L
- VACUUMSCHMELZE Reduces Need for Rare Earth Elements in Synchronous Motors
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.