.gif)
.gif)
Industry News
December 12, 2011
Taiwan Smart Grid Plans Detailed at Darnell’s DC Building Power Asia 2011
The third-annual DC Building Power Asia conference was opened by Dr. Faa-Jeng Lin, Chair of the National Energy Project – Smart Grid and AMI Division, National Science Council, and Chair Professor, Dept. E. E. National Central University, who presented a detailed description of the master plan for the implementation of smart grid technologies in Taiwan by 2030.
Among the topics presented by Dr. Lin were ’cellular smart grids’, smart home energy systems and the use of advanced distribution automation technologies to enable the absorption of high levels of distributed generation resources. This is a critical goal, due to the need to replace today’s nuclear power stations with renewable energy within 20 to 30 years. Renewable energy sources (primarily off-shore wind and PV) are expected to rise from 1% of capacity today to 15% by 2020, reaching 30% by 2030.
Dr. Lin described the concept of a "Multi-Microgrid." This unique concept calls for a series of arbitrary microgrid elements that could be integrated or separated like building blocks to modify the size and structure of the microgrid in real time in response to changing conditions in renewable energy resources and energy demand. This concept is expected to support the development of Cellular Smart Grids.
Equipment being developed for use with smart home energy systems includes intelligent home appliances, chargers for electric vehicles, power management chips, energy management system, home gateway, human-machine interface control, load type of control interface, wireless sensors, wired sensors, and communications module.
Taiwan expects to use advanced distribution automation and microgrid technologies to enhance the total installed capacity of renewables. In addition, the goal is to promote smart home (building) energy management technology to increase 20% energy usage efficiency in 2015 compared to 2005. And to implement the developed key technologies of smart grid and AMI, the install capacity of distributed generations will be 17.8GW and create 120 billion NT value (about $40 billion) and more than 20,000 jobs per year from 2010 to 2025.
Opinion: Distributed Generation Drives Industry Transformation
Taiwan has established substantial local expertise in the development and implementation of smart grid technologies by tying in closely with the smart grid development schedule of Taiwan Power Company, integrating the research abilities of industry and academia to establish smart grid and government support of the power facilities industry in Taiwan.
The government has committed to promote AMI, microgrid, smart home (building) energy management system, advanced distribution automation pilot projects by National Science Council to develop key technologies of smart grid and AMI and ensure that the merging of the developed technologies into the power system in Taiwan will be reliable and feasible.
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- ICCNexergy Adds Line of Lithium-Iron-Phosphate Batteries for Medical Carts
- Sungrow Presents New PV Inverters Again at Intersolar 2013
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.