New Products
July 29, 2009
Server Tech Launches Switched, 3-Phase, 400V, 32A CDU With Mixed-Outlets (18 C13 & 6 C19)
Server Technology announced the availability of the CW-24V4 mixed-outlet Cabinet Power Distribution Unit. This is a 3-Phase CDU with 32A and 400V, making this a high-density power distribution solution. The mixed outlet configuration consists of (18) IEC C13 outlets and (6) IEC C19 outlets. Each outlet can be switched on, off, or rebooted via the CDU’s built-in firmware.
The web GUI can easily be accessed via IP, network, the SPM (Sentry Power Manager) software system, or serial connection. The local current monitors, positioned on the top front panel of the CDU, can easily be inverted via the web GUI or serial interface to provide True RMS current monitoring for onsite verification of the current draw (in Amps) on each power circuit, no matter which way the CDU is installed in the rack. This Switched CDU has top front-panel network, serial, and environmental connections along with a bottom power cord entry.
Along with the original 24 outlets on the CDU, an expansion CDU can be linked to the master. Both the master and expansion can be controlled under one IP address. This product uses circuit breakers for branch circuit protection. This meets the UL 60950-1 requirement for branch circuit protection.
The three local current LED monitors provide True Digital RMS current monitoring for onsite verification of the current draw (in Amps) on each branch circuit and are critical for preventing overloads in high-density computing environments. Local and remote current meters on each branch circuit also make it easy to balance the load and ensure efficient operation when distributing power from 3-Phase circuits.
The Switched product line allows for network monitoring, management, and control of the CDU using either the serial interface, internal web interface or the Sentry Power Manager (SPM) Software System. Each Switched CDU that Server Technology produces, including this mixed-outlet 400V model, supports two external ten-foot probes used to monitor both temperature and humidity.
Opinion: Unraveling the Ultra-Low Power Design Issues
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- PowerbyProxi Joins Wireless Power Consortium
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- SiC and GaN Again a Major Focus at PCIM Europe
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Gate Drive Optocouplers for High-Speed SiC FETs Deliver up to 2.5A
- Eaton and CA Technologies Join to Deliver Infrastructure Management for Data Centers
- Power-One Gets $1 Billion – ABB Gets Inverters
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- Bosch Claims First Sub-$450 240V EV Charging Station
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- Microchip Expands 8-bit PIC Microcontroller Family with Intelligent Analog Integration
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Factory to Produce Lithium-Ion Battery Materials Enabling 10-Year Life and 60,000 Cycles
- Europeans Establish Dueling Projects to Advance Power Electronics Technologies
- 1-Watt DC-DC Achieves 88% Efficiency and has MSL 1 Moisture-Sensitivity Rating
- Alpha and Omega Expands Family of EZBuck Regulators Featuring Constant On-Time Control
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.
.gif)


.gif)