.gif)
.gif)
Industry News
July 11, 2012
New Chip Developed by MIT Captures Power from Multiple Sources
Researchers at the Massachusetts Institute of Technology (MIT) have taken a significant step toward battery-free monitoring systems – which could ultimately be used in biomedical devices, environmental sensors in remote locations and gauges in hard-to-reach spots, among other applications.
Previous work from the lab of MIT professor Anantha Chandrakasan has focused on the development of computer and wireless-communication chips that can operate at extremely low power levels, and on a variety of devices that can harness power from natural light, heat and vibrations in the environment. The latest development, carried out with doctoral student Saurav Bandyopadhyay, is a chip that could harness all three of these ambient power sources at once, optimizing power delivery.
The energy-combining circuit is described in a paper being published this summer in the IEEE Journal of Solid-State Circuits.
"Energy harvesting is becoming a reality," says Chandrakasan, the Keithley Professor of Electrical Engineering and head of MIT’s Department of Electrical Engineering and Computer Science. Low-power chips that can collect data and relay it to a central facility are under development, as are systems to harness power from environmental sources. But the new design achieves efficient use of multiple power sources in a single device, a big advantage since many of these sources are intermittent and unpredictable.
"The key here is the circuit that efficiently combines many sources of energy into one," Chandrakasan says. The individual devices needed to harness these tiny sources of energy – such as the difference between body temperature and outside air, or the motions and vibrations of anything from a person walking to a bridge vibrating as traffic passes over it – have already been developed, many of them in Chandrakasan’s lab.
Combining the power from these variable sources requires a sophisticated control system, Bandyopadhyay explains: Typically each energy source requires its own control circuit to meet its specific requirements. For example, circuits to harvest thermal differences typically produce only 0.02 to 0.15V, while low-power photovoltaic cells can generate 0.2 to 0.7V and vibration-harvesting systems can produce up to 5V. Coordinating these disparate sources of energy in real time to produce a constant output is a tricky process.
So far, most efforts to harness multiple energy sources have simply switched among them, taking advantage of whichever one is generating the most energy at a given moment, Bandyopadhyay says, but that can waste the energy being delivered by the other sources. "Instead of that, we extract power from all the sources," he says. The approach combines energy from multiple sources by switching rapidly between them.
Another challenge for the researchers was to minimize the power consumed by the control circuit itself, to leave as much as possible for the actual devices it’s powering – such as sensors to monitor heartbeat, blood sugar, or the stresses on a bridge or a pipeline. The control circuits optimize the amount of energy extracted from each source.
The system uses an innovative dual-path architecture. Typically, power sources would be used to charge up a storage device, such as a battery or a supercapacitor, which would then power an actual sensor or other circuit. But in this control system, the sensor can either be powered from a storage device or directly from the source, bypassing the storage system altogether. "That makes it more efficient," Bandyopadhyay says. The chip uses a single time-shared inductor, a crucial component to support the multiple converters needed in this design, rather than separate ones for each source.
David Freeman, chief technologist for power-supply solutions at Texas Instruments, who was not involved in this work, says, "The work being done at MIT is very important to enabling energy harvesting in various environments. The ability to extract energy from multiple different sources helps maximize the power for more functionality from systems like wireless sensor nodes."
Only recently, Freeman says, have companies such as Texas Instruments developed very low-power microcontrollers and wireless transceivers that could be powered by such sources. "With innovations like these that combine multiple sources of energy, these systems can now start to increase functionality," he says. "The benefits from operating from multiple sources not only include maximizing peak energy, but also help when only one source of energy may be available."
The work has been funded by the Interconnect Focus Center, a combined program of the Defense Advanced Research Projects Agency and companies in the defense and semiconductor industries.
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- SiC and GaN Again a Major Focus at PCIM Europe
- PowerbyProxi Joins Wireless Power Consortium
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- Eaton and CA Technologies Join to Deliver Infrastructure Management for Data Centers
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- European Project Reports Achievements in Drive to Shape the Future of Power Microelectronics
- Bosch Claims First Sub-$450 240V EV Charging Station
- Vicor Reports Reduced Q1 Results – Anticipates a Brighter Future
- GE Opens $1.5 Million New Product Introduction Accelerator Lab
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- ROHM Claims New Hybrid MOS Combines the Best Characteristics of MOSFETs and IGBTs
- SL Packs 60 Watts of Industrial-Grade AC-DC Power in Small and Robust Package
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.