.gif)
.gif)
Industry News
July 30, 2012
Siemens Studying Use of Direct Current in Buildings
Siemens, working together with European partners, is studying if and how direct current (dc) could be used inside buildings in addition to the usual alternating current (ac). This addition could save energy when used in certain applications, such as in office buildings. It could also be advantageous for the integration of renewable energy sources and for grid stability. The project, known as DC Components and Grid (DCC+G), is funded by a number of European research ministries and will run until spring 2015.
Recommended: NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
According to a European Union directive, buildings constructed after 2020 will have to be nearly energy-neutral. The main por-tion of their power requirement must be generated on site using renewable sources. In comparison, buildings are currently among the world’s biggest energy consumers, being responsible for around 40 percent of the total consumption. Almost every one of today’s consumption points in buildings utilizes dc. Every system or device has its own power supply that takes 230Vac from the low-voltage grid and converts it into an appropriate dc voltage.
A dc power network within a building would enable the innumerable decentralized power supplies to be replaced by several large rectifiers. Such centralization would boost efficiency for the IT sector, for example, because the power supply units of laptops and computer clusters suffer relatively high losses. The situation is similar in the case of lighting systems that contain light-emitting diodes. LEDs are becoming a mass market item, and could receive another boost if DC networks were used. The DCC+G consortium, which is led by Corporate Technology (CT), Siemens’ global research department, wants to set up an optimized 380Vdc network, taking an office building and a superstore as examples. The researchers expect to achieve energy savings of five percent in each case.
Related: Power-One Announces New Open-Frame Products for Industrial and Medical Applications
The partners in the project, which include Philips, Infineon Technologies, and the Fraunhofer Institute for Integrated Systems and Device Technology (IISB) in Erlangen, are working on new semiconductor technologies for high-efficiency control components, switching systems for net-work protection, and rectifiers that serve as network-stabilizing interfaces to the conventional secondary distribution network. They are also studying network architectures and energy man-agement systems for optimal energy distribution in the dc net-work. Siemens is focusing here on sensor systems.
Among other things, researchers at CT want to develop and integrate new kinds of electrically isolated current and voltage sensors for direct volt-age systems with large bandwidths. They also intend to push forward innovation in sensor systems for monitoring electrical energy flows. DCC+G is linked to ENIAC (European Nanoelectronics Initiative Advisory Council) and is supported from EU and several European research ministries. In Germany the Federal Research Ministry supports DCC+G with four million Euro using the research pro-gram IKT 2020. The support of highly efficient and economic energy systems reflects the focus of the national research in the ICT sector.
Opinion: Maximising Synergies between Power Electronics and ICT for improving Energy Efficiency
More news and information regarding the latest developments in Smart Grid electronics can be found at Darnell’s SmartGridElectronics.Net.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- IR Intros Compact Low-Side Gate Drive in SOT-23-5L
- VACUUMSCHMELZE Reduces Need for Rare Earth Elements in Synchronous Motors
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.