.gif)
.gif)
New Products
September 4, 2012
ON Semiconductor Introduces Li-Ion Battery Charger
ON Semiconductor, supplier of silicon solutions for energy efficient electronics has introduced a fully programmable Lithium-Ion (Li-Ion) switching battery charger optimized for power efficiency in smart phones, tablets and other handheld devices.
Recommended: PowerbyProxi Joins Wireless Power Consortium
The NCP1851 significantly reduces charge time, increases battery life and includes advanced startup features.
According to a release, with 1.6A charging capability, the device is perfectly sized at 2.2 x 2.55 mm for the latest USB compliant input supplies and large battery capacities, and can complete a full charge cycle of a 1650 milli ampere hour (mAh), 4.2V Li-Ion battery in 90 minutes.
Related: Eaton and CA Technologies Join to Deliver Infrastructure Management for Data Centers
"Robustness, efficiency and fast charge time are now prerequisites for designers of today's high performance, ultra-space constrained applications," said Thibault Kassir, director of ON Semiconductor's Interface & Power ICs Division. "The NCP1851 single chip solution allows simple integration into the latest USB charging designs. We are already receiving wins from our major customers for the device due to its charge time performance and advanced feature set."
The NCP1851 integrates dynamic power path management, which enables instant system turn-on in case of a weak battery and helps replenish a discharged battery. Both the device's internal junction temperature sensor and external Negative Temperature Coefficient (NTC) thermistor ensure safe charging of the system by reporting dedicated interrupts to the i2C Control Bus. The NCP1851 provides a USB On-the-Go (OTG) mode that boosts battery voltage to power accessories plugged into the USB port, eliminating the need for another step-up converter.
Opinion: Maximising Synergies between Power Electronics and ICT for improving Energy Efficiency
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- PowerbyProxi Joins Wireless Power Consortium
- SiC and GaN Again a Major Focus at PCIM Europe
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Gate Drive Optocouplers for High-Speed SiC FETs Deliver up to 2.5A
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Power-One Gets $1 Billion – ABB Gets Inverters
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- Bosch Claims First Sub-$450 240V EV Charging Station
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- Microchip Expands 8-bit PIC Microcontroller Family with Intelligent Analog Integration
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Factory to Produce Lithium-Ion Battery Materials Enabling 10-Year Life and 60,000 Cycles
- Europeans Establish Dueling Projects to Advance Power Electronics Technologies
- 1-Watt DC-DC Achieves 88% Efficiency and has MSL 1 Moisture-Sensitivity Rating
- Alpha and Omega Expands Family of EZBuck Regulators Featuring Constant On-Time Control
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.