.gif)
.gif)
New Products
September 18, 2012
O2Micro Extends Free Dimming Technology With New Isolated Step-Dimming Driver
O2Micro International Limited has extended the Company's Free Dimming™ technology and Lighting product portfolio with the introduction of the OZ8027A. O2Micro's Free Dimming technology enables LED bulbs to dim using any on/off switch, thus eliminating cost, installation and compatibility problems associated with traditional incandescent dimmers. Free Dimming technology works with any on/off switch, including wall toggles, paddle switches, pull cords, rotary switches and other types of on/off switches commonly found on walls, extension cords and table/desk lamps.
According to the National Electrical Manufacturers Association (NEMA), there are over 4.4 billion medium, screw-based light sockets in the U.S. Yet, according to industry estimates, there are only 150 million incandescent dimmers representing an enormous, untapped market opportunity for O2Micro's Free Dimming technology, which is inherently simple and works with any non-dimming on/off switch.
The OZ8027A LED Driver Controller provides three-step dimming using any ordinary non-dimming on/off switch. It features an isolated flyback topology to help support UL regulatory requirements. The OZ8027A also features power factor correction, achieving high power factor over a wide input voltage range and very low THD to meet various regulatory requirements. The built-in high voltage startup circuit provides fast startup operation and reduces the BOM count. The device is also compatible with neon indicators commonly found in wall switches.
Related: US Government Honors Raytheon for GaN Innovations
The OZ8027A supports universal 85V to 265V operation, enabling one LED bulb to address the global marketplace. High efficiency greater than 85% reduces energy consumption and thermal management complexity. Integrated over-temperature, over-voltage, cycle-by-cycle current limiting, LED open circuit and LED short circuit protection provides safe and reliable operation. Excellent LED current regulation ensures consistent lumen output, regardless of varying line input conditions.
The OZ8027A is available in a cost effective 8-pin SOP package and is in high volume production now. Samples and evaluation boards are available now for qualified customers.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- IR Intros Compact Low-Side Gate Drive in SOT-23-5L
- VACUUMSCHMELZE Reduces Need for Rare Earth Elements in Synchronous Motors
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.