.gif)
.gif)
New Products
October 22, 2012
New quad N and P channel MOSFETS from Advanced Power Electronics Corp.
Advanced Power Electronics Corp. (USA) announced new quad complementary N- and P-channel enhanced-mode MOSFETs that target full bridge applications such as servo and DC motors. Simple to drive and with a low on-resistance, the AP9930GM-HF-3 devices are available in a standard SO-8 package commonly used in surface mount industrial designs.
Recommended: Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
N-channel performance ratings include: Drain Source Voltage (VDS) of 30V; RDS(ON) of 33mΩ; and Continuous Drain Current (ID) of 5.5A. For the P-channel, VDS is -30V, RDS(ON) is 55mΩ and ID is -4.1A. The package is halogen-free and compliant with both current RoHS and REACH environmental requirements for hazardous materials.
Comments Ralph Waggitt, President/CEO, Advanced Power Electronics Corp. (USA): "These new quad MOSFETs provide designers with the best possible combination of fast switching, low on resistance and cost effectiveness."
Related: Fujitsu Unveils MCUs Targeting Industrial Equipment and High-End Consumer Applications
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- Delta Acquires Neo Solar Power, Forms Taiwan's Largest Maker of PV Cells and Modules
- ICCNexergy Adds Line of Lithium-Iron-Phosphate Batteries for Medical Carts
- IR Intros Compact Low-Side Gate Drive in SOT-23-5L
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.