.gif)
.gif)
New Products
December 4, 2012
125Vdc Output AC-DC Power Supply with Universal Input Suits Industrial Applications
ABSOPULSE Electronics' PFH 53TF Series of ac/dc switching power supplies deliver up to 400W output power from a compact 4.5 x 5.3 x 10.3in enclosure. The supplies employ a power factor corrected input and a following half-bridge stage to convert the universal ac-input voltage (95V to 264Vac) to 110Vdc, 125Vdc or 150Vdc output with fan cooling. DC-input versions are also available.
Recommended: Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
The isolated, floating outputs can be grounded to either terminal, so that the unit can be used in either positive or negative grounded systems, or left floating. Alternatively, several units can be connected in series for higher voltage. An optional built-in redundancy diode is available to allow for paralleling and N+1 operation, or connection to a back-up battery. An optional Form C output fail alarm may also be installed.
The power supplies meet the EN61000-3-2 directive for active power factor correction, comply with EN/IEC60950-1 and meet the requirements for CE marking. Protection features include 4300Vdc input/output isolation, overload, over-voltage and short circuit protection with thermal shutdown and self-resetting.
Related: Fujitsu Unveils MCUs Targeting Industrial Equipment and High-End Consumer Applications
The PFH 53TF Series is suitable for a broad range of heavy-duty applications including industrial automation, power utilities and telecommunications. They can be installed on thermally non-conductive surfaces, such as plastic, as well as on curved or uneven surfaces. Installation on a heat-sinking surface is not required because the unit does not rely on conduction cooling.
Heavily ruggedized and conformal coated versions of this design are available for applications that require immunity to high levels of shock, vibration and/or humidity. Standard versions of the series are priced in the US$318 range in quantities of 100.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- IXYS Introduces an Anode-Gated Thyristor Technology Platform
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- Ideal Diode Bridge Controller Minimizes Rectifier Heat and Voltage Loss
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Silicon Labs acquires Energy Micro for IoT, Smart Energy and Portable Electronics
- NXP Brings High Efficiency to 12V MR16 Lamps with Dimmable LED Controller
- Ultra-Compact High-Efficiency Power Supplies for Automotive Applications
- Curtis Industries Acquires California-based Tri-Mag
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Single-Stage LED Drivers Deliver Dimming and Thermal Protection with Lower BOM Cost
- Convection-Cooling Eliminates Fan Maintenance and Audible Noise in 250W Power Supplies
- Ericsson Delivers 750W Quarter-Brick using Proprietary HRR Topology
- Siemens Installing Regenerative Energy Storage Unit on Light Rail Line
- Dreamliner Nightmares a Factor in New UL Standards Activities for Li-ion Batteries
- GE Intros Megawatt UPS Global Platform with Industry-Leading Efficiency
- Dow Corning adds Thermal Management Options Optimized for Electronics Applications
- ABB Demonstrates Technology to Power Flash Charging Electric Bus in 15 Seconds
- Power-One Announces New Open-Frame Products for Industrial and Medical Applications
- ABB to Produce PV Inverters in South Africa as Solar Market Expands
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.