.gif)
.gif)
Industry News
January 18, 2013
Battery Over-Voltage May Have Caused Fire on Boeing 787
According to a statement from the Japan Transport Safety Board, the Li-ion battery that was located beneath the cockpit of the Boeing 787 that recently caught fire while on the ground at Boston's Logan Airport may have been subjected to "voltage exceeding the design limit." The suggestion is that the fault may not be in the battery itself, but in the battery protection circuitry. A clear understanding of the cause is important not only for the future of the 787, but also for the Airbus A350 and the International Space Station (ISS), both of which have announced their intent to use the same or very similar Li-ion batteries from GS Yuasa Lithium Power, Inc.
In a statement, Airbus indicated that is does not see an imminent effect of the Boeing 787 grounding on the Airbus A350 program, which also plans to use the same Li-ion batteries causing problems for the 787. Boeing is the prime contractor to NASA for the space station and is responsible for the integration of new hardware and software from a range of suppliers. In November, GS Yuasa won a contract to provide lithium ion batteries that eventually will help power the ISS.
Because planes like the Boeing 787 and Airbus A350 rely more than any previous airliners on electrical signals to help power and control nearly all their systems, they must use the latest Li-ion battery technologies. For example, the 787 runs more on batteries than other planes offered by Boeing and received special FAA permission in 2007 for the use of the Li-ion batteries.
Related: Cymbet EnerChip Solid State Batteries Verified 100% Biocompatible
A NASA spokesman at the Johnson Space Center in Houston, said the batteries for the space station are the same technology but "different." While the 787 and A350 have designed in batteries from GS Yuasa Lithium Power's LPV series products, the ISS will use products from the company's GEN II LSE lithium-ion prismatic series.
Pratt & Whitney Rocketdyne (PWR) was the sub-contractor that awarded GS Yuasa the contract to provide lithium ion (Li-ion) battery cells to be used on the International Space Station (ISS). PWR will integrate GS Yuasa Li-ion cells into batteries that will replace the nickel-hydrogen (Ni-H2) batteries which currently power the ISS Electrical Power System (EPS) during its eclipse mode. This battery replacement effort is part of an initiative to extend the operation and utilization of the ISS.
Opinion: Benefits of Supercapacitors in Industrial Handheld Devices
"Over the past 3 years, GS Yuasa's technology and manufacturing capability have been thoroughly evaluated by NASA. Following destructive physical analyses of our cells, successful completion of cell qualification and comprehensive audits of our processes and facilities, this award affirms GS Yuasa's uncommon quality, service and value," said Curtis Aldrich, GYLP's director of business development at the time that the initial contract was awarded. "We are very happy to continue our relationship with PWR and we are proud to have the opportunity to support the ISS program."
GS Yuasa will supply its LSE134 li-ion cell which has completed qualification testing for the ISS program. The LSE134 (134Ah nameplate capacity) cell is a member of GS Yuasa's Generation III family of Li-ion cells for space and is ideally suited to the electrical, size and mass requirements of this mission. The LSE134 approximately triples the available energy storage on both a per mass and a per volume basis relative to the existing Ni-H2 battery and is capable of powering critical ISS systems well beyond the required 10-year service life.
Share this story
Send via E-mail
Post to Twitter
On the Web:
White Papers
March 11, 2013
Power Modules for Charger Applications
Sponsored by Vincotech
February 27, 2013
The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications
Sponsored by Vicor Corp.
February 27, 2013
From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year
Sponsored by Vicor Corp.
More White Papers
- Altera Acquires Enpirion for $140 Million, Forms Power Business Unit
- PowerbyProxi Joins Wireless Power Consortium
- SiC Modules, IGBTs and Super-Junction MOSFETs Introduced on Day One of PCIM
- Ericsson Saves Board Space with Surface-Mount Digital Bus Converter
- SiC and GaN Again a Major Focus at PCIM Europe
- Vincotech and Infineon Introduce New Packaging Options at PCIM Europe
- Bosch Claims First Sub-$450 240V EV Charging Station
- DOE Selects Consortium to Develop Next-Generation Batteries for Automobiles
- Gate Drive Optocouplers for High-Speed SiC FETs Deliver up to 2.5A
- Dana Receives Grant from NRCan to Improve Thermal Management for EV Battery Packs
- Power-One Gets $1 Billion – ABB Gets Inverters
- Renesas Adds IGBT Drivers with Micro-Isolator for Electric and Hybrid Vehicle Inverters
- Bosch Claims First Sub-$450 240V EV Charging Station
- Alpha and Omega Delivers "Lowest" On-Resistance in a DFN5x6 with 150V Power MOSFET
- Microchip Expands 8-bit PIC Microcontroller Family with Intelligent Analog Integration
- 500W Full-Brick DC-DC Converter Optimized for Fuel Cell Applications
- Factory to Produce Lithium-Ion Battery Materials Enabling 10-Year Life and 60,000 Cycles
- Europeans Establish Dueling Projects to Advance Power Electronics Technologies
- 1-Watt DC-DC Achieves 88% Efficiency and has MSL 1 Moisture-Sensitivity Rating
- Alpha and Omega Expands Family of EZBuck Regulators Featuring Constant On-Time Control
- Green Building Power Forum 2010: Fujitsu Components America
- Darnell's Digital Power Forum 2009: CUI Incorporated
- Green Building Power Forum 2010: EMerge Alliance
- Green Building Power Forum 2010: Anderson Power Products
- Green Building Power Forum 2009: Independence Station
- Darnell's Digital Power Forum 2009: Coilcraft
- Darnell's Digital Power Forum 2009: Champs Technologies
- Darnell's Digital Power Forum 2009: EXAR Corporation
- Darnell's Digital Power Forum 2009: PMBus
- Darnell's Digital Power Forum 2009: Power Plaza
Design Features
October 22, 2012
Energy Efficiency with Class D Amplifier Modules
Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.
Design Features
October 8, 2012
The Role of Hall Effect Sensors in Power Distribution Infrastructure
Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.
Product Focus
August 13, 2012
The Year in AC-DC Power Supply Technology
The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.