ADVERTISEMENT

Subscribe to the PowerPulse Newsletter

Conferences and Forums

Darnell's Energy Summit

Darnell's Power Forum

Green Building Power Forum

Smart Grid Electronics Forum

Industry News

February 11, 2013

NTSB Focuses JAL 787 Li-ion Fire Investigation on Battery Design and Certification Process

National Transportation Safety Board (NTSB) Chairman Deborah A.P. Hersman identified the origin of the Jan. 7 battery fire that occurred on a Japan Airlines 787 parked at Boston Logan Airport, and said that a focus of the investigation will be on the design and certification requirements of the battery system.

Recommended: Altera Acquires Enpirion for $140 Million, Forms Power Business Unit

"U.S. airlines carry about two million people through the skies safely every day, which has been achieved in large part through design redundancy and layers of defense," said Hersman during a news conference. "Our task now is to see if enough - and appropriate - layers of defense and adequate checks were built into the design, certification and manufacturing of this battery."

ADVERTISEMENT

After an exhaustive examination of the JAL lithium-ion battery, which was comprised of eight individual cells, investigators determined that the majority of evidence from the flight data recorder and both thermal and mechanical damage pointed to an initiating event in a single cell. That cell showed multiple signs of short circuiting, leading to a thermal runaway condition, which then cascaded to other cells. Charred battery components indicated that the temperature inside the battery case exceeded 500 degrees Fahrenheit.

Related: Amorphous and Tape-Wound Cores, SMD Capacitors and Rugged Connectors at PCIM

As investigators work to find the cause of the initiating short circuit, they ruled out both mechanical impact damage to the battery and external short circuiting. It was determined that signs of deformation and electrical arcing on the battery case occurred as a result of the battery malfunction and were not related to its cause.

Chairman Hersman said that potential causes of the initiating short circuit currently being evaluated include battery charging, the design and construction of the battery, and the possibility of defects introduced during the manufacturing process.

Opinion: Maximising Synergies between Power Electronics and ICT for improving Energy Efficiency

During the 787 certification process, Boeing studied possible failures that could occur within the battery. Those assessments included the likelihood of particular types of failures occurring, as well as the effects they could have on the battery. In tests to validate these assessments, Boeing found no evidence of cell-to-cell propagation or fire, both of which occurred in the JAL event.

The NTSB learned that as part of the risk assessment Boeing conducted during the certification process, it determined that the likelihood of a smoke emission event from a 787 battery would occur less than once in every 10 million flight hours. Noting that there have been two critical battery events on the 787 fleet with fewer than 100,000 flight hours, Hersman said that "the failure rate was higher than predicted as part of the certification process and the possibility that a short circuit in a single cell could propagate to adjacent cells and result in smoke and fire must be reconsidered."

As the investigation continues, which will include testing on some of the batteries that had been replaced after being in service in the 787 fleet, the NTSB will continue to share its findings in real time with the FAA, Boeing, the Japan Transport Safety Board, and the French investigative agency, the Bureau d'Enquêtes et d'Analyses.

"The decision to return the fleet to flight will be made by the FAA, which underscores the importance of cooperation and coordination between our agencies," Hersman said. She also announced that the NTSB would release an interim report of factual findings within 30 days.

Share this story

Send via E-mail
Post to Twitter

On the Web:

National Transportation Safety Board
The Boeing Co.

ADVERTISEMENT

White Papers

March 11, 2013

Power Modules for Charger Applications

Sponsored by Vincotech

February 27, 2013

The Adaptive Cell Converter Topology Enables Constant Efficiency Over Universal Input AC Line in Front-End, High-Density Power Factor Correction Applications

Sponsored by Vicor Corp.

February 27, 2013

From 48 V direct to Intel VR12.0: Saving "Big Data" $500,000 per datacenter, per year

Sponsored by Vicor Corp.

More White Papers

Most Popular

Design Features

October 22, 2012

Energy Efficiency with Class D Amplifier Modules

Class-D switching amplifiers are helping audio designers create personal multimedia devices and home audio/visual systems that demonstrate how compact and stylish equipment can also deliver high sound quality and high audio output power. The key to this breakthrough, providing freedom from the large and bulky boxes housing traditional audio products, lies in the class-D amplifier’s high energy efficiency, which is typically around 90%. This allows designers to reduce or eliminate heatsinks as well as using smaller-sized PCBs and smaller components such as transformers, connectors and power supplies.

Read this paper

Design Features

October 8, 2012

The Role of Hall Effect Sensors in Power Distribution Infrastructure

Power distribution units (PDUs) form an essential part of modern computing and data communications hardware. They provide multiple outputs for transferring electrical power with maximum efficiency, controlling the power capacity and safeguarding against the possible causes of supply interruption. With an ever increasing need from tech savvy consumers for higher data throughput and greater quantities of data storage capacity, as well as tough international legislation now governing CO&sub2; emissions, the demands being placed on these units are proving challenging for engineering teams to satisfy.

Read this paper

Product Focus

August 13, 2012

The Year in AC-DC Power Supply Technology

The past year witnessed significant new product releases, technological developments, and industry news related to the field of AC-DC Power Supply technology.

Read this paper

Read More Technical Features

 

©2013 Darnell Group Inc.